- 752TC is a full, deep cavity back iron with more side wall weighting for higher perimeter weighting which means better feel and more distance when hit off-center.
- 752TC features a thicker top line and an extended weight pad off the back of the sole to move the Center of Gravity farther back from the shaft; Moving the CG back from the shaft helps to increase the trajectory of the ball for more carry distance and better backspin
-
752TC irons also feature the TWGT "Smart-Sole" design - wide sole area for lower CG but with the front and back edges of the sole radiused up to reduce sole surface contact for less chance of "fat shots"
- Model 770CFE irons represent the first set of irons designed with a forged steel, CNC machined, variable thickness face design.
-
The 770CFE irons are designed with a variable thickness forged face to offer golfers a little higher ball-speed to swing-speed ratio than is possible with a conventional thick face iron design, but also to offer golfers a much better off-center hit forgiveness because of the variable thickness face.
-
The sole design of the 770CFE is designed to keep a large amount of mass low, but by beveling the back edge of the sole the sole width is not too wide and ensures proper sole playability from all types of turf and lie conditions.
-
770CFE irons were awarded the Golf Tips Magazine's Top Concept Tech Award for 2004.
- Left Hand available
- TWGT uses a 5-step forging process which is one more step than most all other forged irons; the additional step is done to compress the steel tighter in the head and to help reduce the amount of grinding that is required to prepare the irons for nickel/chrome electro-plating. This also ensures more consistency of shape in the set.
- 550C/550M are true forged carbon steel designs, made from a softer alloy of Carbon Steel called 1035C with lower carbon content for allowing the forging process to pack the steel tighter and improve grain structure and reduce internal voids.
- 550C is a true Cavity-back design, which means it is forgiving on off-center hits and recommended for all levels of players.
- 550M is a true muscle-back design – preferred by better ball strikers.
-
550C/550M have a true "tour grind" shape sole design, which means it is slighly rounded from the front to back, and also has the leading edge and trailing edge rounded to prevent the sole from sticking in the turf when it is used.
-
Model 321Li hybrid long iron replacements are undoubtedly the ultimate in true full hybrid long iron design due to the accompanying design of the matching GI-335 graphite iron shaft, or the Series 5 Steel .335" tip shaft.
- 321Li full hybrid long iron heads are designed in a #1 thru 6-iron.
-
321Li full hybrid long iron heads are designed with a hosel to face position that is much more like a true iron for the proper appearance and set up at address.
-
Designed with 0" roll just like an iron, but with a slight 20" horizontal bulge radius to match with the location of the CG farther back from the face than a typical ironhead.
- TWGT is proud to introduce another design "first" with the 785HF (Hot Face) irons; the first full set of true hybrid body irons intended to be a full set alternative to conventional thin body irons.
- Face Profile shapes progress taller from long through short irons and wedge in the manner of conventional iron face profiles.
- 785 Hot Face irons are designed with progressively thinner faces, each forged and machined from the same alloy used to make the first 0.830 COR fairway woods in the game - Wishon Golf's 515GRT.
- 785HF soles are "split-level" designed to reduce
actual sole to turf contact to make each 785 head play more like a
conventional wide-sole iron.
- Designed with the mid to higher handicap player in mind.
- Full forgiveness cavity back design, yet a slightly more narrow sole for reduced turf impact.
- CNC milled 100% flat face with square grooves that
are machined into the face one at a time for maximum spin.
- A half cavity back model and the ultimate club for the middle to lower handicap player.
- More feel and workability than the cb1 while still offering plenty of forgiveness on mishits.
- CNC milled face, 303 stainless steel and machined square grooves.
- Competitive golfers worldwide have fallen in love with this full muscleback beauty.
- The 303mb irons offer the feel and workability needed to shape your shots to attack even the most unforgiving pin locations.
- Classic blade and top-line, CNC milled face, 303
stainless steel with machined square grooves for the ultimate in
quality and spin control.
Drivers
Wishon
Mondeo
SMT
Fairway Woods
Irons/Hybrids
Wedges
Shafts
Wishon
RLM
SK Fiber
Harrison
FST
Putters
Grips
Repairs
About Us
Contact